ChargeArmorMechanical EV cable protection

Preparing mechanical cable protection…

SYS: CHARGEARMOR/PROTECT

MODE: MECHANICAL · FIELD: OUTDOOR

CHARGEARMOR / SECURE CHANNEL

HANDSHAKE

assessing cable exit zone…

arming mechanical sleeve…

verifying tamper resistance…

channel open.

MECHANICAL EV CABLE PROTECTION.

Protect EV charging cables. Preserve uptime.

ChargeArmor is a physical protection sleeve for EV charging cables. It reinforces the high-risk cut zone near the connector exit—helping deter theft attempts, reduce damage, and keep charging points online.

Request a Quote How It Works

CLARITY

The problem EV charging networks face.

Exposed cables are an easy target. A single cut can cause immediate charger downtime, emergency replacement work, and operational disruption—especially when the same sites are hit repeatedly.

Built for public charging networks, fleet & workplace charging, parking and retail operators, and municipal infrastructure.

THE PROBLEM

Exposed cables. Avoidable downtime.

EV charging cables are valuable because of their copper content—and they’re often installed in public or semi-public environments with limited supervision. A single cut can take a charging point out of service and become a repeatable operational problem across multiple sites.

Downtime and lost availability

A cut cable can immediately put a stall offline and reduce site throughput.

Emergency dispatch and labor

Incidents trigger urgent technician callouts—often outside planned maintenance windows.

Replacement cost and repeat incidents

Cable and connector replacement adds cost, especially when the same sites are targeted repeatedly.

Network reliability and customer trust

Repeated outages reduce driver confidence and degrade perceived reliability across the network.

THE SOLUTION

Protect the cut zone.

ChargeArmor is a passive, mechanical protection sleeve designed to reinforce the most exposed and targeted part of the cable near the connector exit. It helps reduce incident frequency rather than reacting after a charger is already offline.

Targeted physical reinforcement

Focuses protection on the most exposed segment of the cable for the highest operational impact.

Increases time, effort, and visibility

Makes cutting more difficult and more conspicuous, helping deter opportunistic theft attempts.

Designed for field deployment

Easy to deploy, maintain, and scale across multiple sites—starting with high-risk locations.

WHAT YOU’LL SEE NEXT

The section below shows the field process: identify the cut zone, install the sleeve, and progressively reduce incidents that take chargers offline.

HOW THE PROTECTION WORKS

How the system works in the field.

A passive, mechanical approach: protect the high-risk segment near the connector exit to make cutting more difficult and more visible—helping reduce incidents and downtime.

CURRENT STEP · 01/04

Target the highest-risk segment near the connector exit—where tampering and cutting typically start.

RISK AREA

INSTALL

DETERRENCE

SECURE

protection.flow

Identify the cut zone

Target the highest-risk segment near the connector exit—where tampering and cutting typically start.

Install the sleeve

Fit ChargeArmor as a reinforced protective sleeve around the cable for the required protection length.

Deter theft and damage

Added resistance increases time and effort to cut—making incidents more difficult and more conspicuous.

Keep sites online — scale

Fewer cable incidents reduces emergency replacements, maintenance load, and charger downtime across sites.

OPERATIONAL BENEFITS

Reduce downtime. Lower maintenance load.

Cable incidents are operationally expensive: downtime, technician dispatch, replacement parts, and repeat visits. ChargeArmor helps reduce the frequency and impact of cable cuts by protecting the most targeted segment.

REDUCED CHARGER DOWNTIME

Fewer cable cuts means fewer out-of-service stalls and higher site availability.

LOWER REPLACEMENT & REPAIR COSTS

Reduce avoidable cable and connector replacements caused by cutting and tampering.

LESS MAINTENANCE LOAD

Fewer emergency callouts and repeat incidents helps keep planned maintenance on schedule.

BUILT FOR OPERATORS

For public networks, fleets, and site owners.

ChargeArmor is designed for real maintenance workflows: protect the cable where incidents start, without changing how drivers charge or how your sites are operated.

COMPATIBILITY

READY

Public charging networks and corridor sites
Fleet & workplace charging
Parking, retail, and hospitality operators
Municipal and public infrastructure

PRODUCT

FIELD READY

Deters theft by increasing time and effort to cut
Reduces damage at the cable exit / connector area
Lowers OPEX by reducing emergency replacements and truck rolls
Preserves uptime by preventing avoidable cable-related downtime

DEPLOYMENT

Pilot-ready. Scale when proven.

Start with a small set of high-risk or high-utilization locations, validate the impact on cable incidents and maintenance load, then expand across additional sites with a repeatable, standardized setup.

Select sites

Prioritize incident-prone locations and high-traffic chargers.

Deploy and evaluate

Track reductions in cable incidents, downtime, and emergency replacement work.

Scale consistently

Expand coverage across the network with a standardized setup.

Protect Your Charging Infrastructure

Cable incidents drive downtime, repairs, and repeat maintenance. ChargeArmor is a physical protection solution designed to help deter cutting and reduce cable damage—so chargers stay available.

Talk to Us

CONTACT

Request a Quote

Tell us about your charging sites and we’ll recommend a protection setup. Pilot-ready: start with a few high-risk locations and scale across the network.

contact@chargearmor.com